The following details for roof coping and wall cap coping are typical coping details using a standard 1/2″ wash. Three different type anchors, bottom dowels, cramps and end dowels are detailed in both plan and section.

All straight copings are made 3′-11 3/4″ long (4′-0″ module) or 4′-11 5/8″ long (5′-0″ module) with end stones varying to fit the wall dimension – copings on curved walls are cast to a 3′-0″ module (2′-11 3/4″ long). This applies for both roof copings and wall cap coping.